Cisco Catalyst 3750-X Command Reference

2-714
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show location
show location
Use the show location user EXEC command to display location information for an endpoint.
show location admin-tag
show location civic-location {identifier id number | interface interface-id | static}
show location elin-location {identifier id number | interface interface-id | static}
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Use the show location command to display location information for an endpoint.
Examples This is an example of output from the show location civic-location command that displays location
information for an interface:
Switch> show location civic interface gigabitethernet2/0/1
Civic location information
--------------------------
Identifier : 1
County : Santa Clara
Street number : 3550
Building : 19
Room : C6
Primary road name : Cisco Way
City : San Jose
State : CA
Country : US
admin-tag Display administrative tag or site information.
civic-location Display civic location information.
elin-location Display emergency location information (ELIN).
identifier id Specify the ID for the civic location or the elin location. The id range
is 1 to 4095.
interface interface-id Display location information for the specified interface or all
interfaces. Valid interfaces include physical ports.
static Display static configuration information.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing