2-730
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mac address-table count
show mac address-table count
Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
show mac address-table count [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If no VLAN number is specified, the address count for all VLANs appears.
Examples This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for Vlan : 1
---------------------------
Dynamic Address Count : 2
Static Address Count : 0
Total Mac Addresses : 2
Related Commands
vlan vlan-id (Optional) Display the number of addresses for a specific VLAN. The range is 1
to 4094.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the specified
interface.
show mac address-table
notification
Displays the MAC address notification settings for all
interfaces or the specified interface.
show mac address-table static Displays static MAC address table entries only.
show mac address-table vlan Displays the MAC address table information for the specified
VLAN.