2-828
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show vlan access-map
show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
show vlan access-map [mapname]
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz" 10
Match clauses:
ip address: SecWiz_Gi0_3_in_ip
ip address: SecWiz_Fa10_3_in_ip
Action:
forward
Related Commands
mapname (Optional) Name of a specific VLAN access map.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show vlan filter Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
vlan access-map Creates a VLAN map entry for VLAN packet filtering.
vlan filter Applies a VLAN map to one or more VLANs.