Cisco Catalyst 3750-X Command Reference

2-805
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show stack-power
show stack-power
To display information about StackPower stacks or switches in a power stack, use the show stack-power
user EXEC command.
show stack-power [budgeting | detail | load-shedding | neighbors] [order power-stack-name] |
[stack-name [stack-id] | switch [switch-id]]
Note This command is available only on Catalyst 3750-X switch stacks running the IP base or IP services
image.
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If a switch is shut down because of load shedding, the output of the show stack power command still
includes the MAC address of the shut down neighbor switch. The command output shows the stack
power topology even if there is not enough power to power a switch.
budgeting (Optional) Displays the stack power budget table.
detail (Optional) Displays the stack power stack details.
load-shedding (Optional) Displays the stack power load shedding table.
neighbors (Optional) Displays the stack power neighbor table.
order power-stack-name (Optional) Displays the load shedding priority for a power stack.
Note This keyword is available only after the load-shedding keyword.
stack-name (Optional) Displays budget table, details, or neighbors for all power stacks
or the specified power stack.
Note This keyword is not available after the load-shedding keyword.
stack-id (Optional) Displays power information for the specified power stack. The
stack ID must be 31 characters or less.
switch (Optional) Displays budget table, details, load-shedding, or neighbors for
all switches or the specified switch.
switch-id (Optional) Displays power information for the specified switch. The switch
number is from 1 to 9.
Release Modification
12.2(53)SE2 This command was introduced.
12.2(58)SE The budgeting, detail, load-shedding, neighbors, order power-stack-name,
stack-name [stack-id], and switch keywords were added.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing