Cisco Catalyst 3750-X Command Reference

2-806
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show stack-power
Examples This is an example of output from the show stack-power command.
Switch# show stack-power
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Stndaln 715 509 190 16 1 1
This is an example of output from the show stack-power budgeting command.
Switch# show stack-power budgeting
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Stndaln 715 509 190 16 1 1
Power Stack PS-A PS-B Power Alloc Avail Consumd Pwr
SW Name (W) (W) Budgt(W) Power(W) Pwr(W) Sys/PoE(W)
-- -------------------- ----- ----- -------- -------- ------ -----------
1 Powerstack-1 715 0 223 190 16 59 /0
-- -------------------- ----- ----- -------- -------- ------ -----------
Totals: 190 16 59 /0
This is an example of output from the show stack-power detail command.
Switch# show stack-power detail
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Stndaln 715 509 190 16 1 1
Power stack name: Powerstack-1
Stack mode: Power sharing
Stack topology: Standalone
Switch 1:
Power budget: 223
Power allocated: 190
Low port priority value: 22
High port priority value: 13
Switch priority value: 4
Port 1 status: Not connected
Port 2 status: Not connected
Neighbor on port 1: 0000.0000.0000
Neighbor on port 2: 0000.0000.0000
This is an example of output from the show stack-power load-shedding command.
Switch# show stack-power load-shedding
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Stndaln 715 509 190 16 1 1
Power Stack Priority Consumd Consumd Consumd Alloc Alloc
SW Name Sw-Hi-Lo Sw(W) Hi(W) Lo(W) Hi(W) Lo(W)
-- -------------------- -------- ------- ------- ------- ----- -----
1 Powerstack-1 4-13-22 59 0 0 0 0
-- -------------------- -------- ------- ------- ------- ----- -----
Totals: 59 0 0 0 0
These are examples of output from the show stack-power load-shedding order command.
Switch# show stack-power load-shedding order powerstack-1
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing