2-807
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show stack-power
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Ring 2880 34 473 2373 2 4
Priority Load Switch or PoE
Shed Order Type Devices Shed
---------- ---- ------------------------------------------------------------
22 Lo Gi2/0/16,
21 Lo Gi1/0/13, Gi1/0/20,
12 Hi Gi1/0/7,
4 Sw Switch: 2
3 Sw Switch: 1
Switch# show stack-power load-shedding order powerstack-11
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-11 SP-PS Star 3980 2847 420 713 2 5
Priority Load Switch or PoE
Shed Order Type Devices Shed
---------- ---- ------------------------------------------------------------
20 Lo Gi4/0/4,
2 Sw Switch: 4
1 Sw Switch: 5
This is an example of output from the show stack-power neighbor command.
Switch# show stack-power neighbor
Power Stack Stack Stack Total Rsvd Alloc Unused Num Num
Name Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Powerstack-1 SP-PS Stndaln 715 509 190 16 1 1
Power Stack Port 1 Port 1 Port 2 Port 2
SW Name Status Neighbor SW:MAC Status Neighbor SW:MAC
-- -------------------- ------ ---------------- ------ ----------------
1 Powerstack-1 NoConn - NoConn -
Related Commands Command Description
power inline Configures the power management mode for the specified PoE port or for all
PoE ports.
stack-power Configures power stack parameters.
show power inline Displays the power parameters for the specified PoE port or for all PoE ports.