Cisco Catalyst 3750-X Command Reference

2-110
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear mac address-table move update
clear mac address-table move update
Use the clear mac address-table move update privileged EXEC command on the switch stack or on a
standalone switch to clear the MAC address table move-update counters.
clear mac address-table move update
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear the MAC address table move-update counters.
Switch# clear mac address-table move update
You can verify that the information was cleared by entering the show mac address-table move update
privileged EXEC command.
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
mac address-table move update
{receive | transmit}
Configures MAC address-table move update on the switch.
show mac address-table move update Displays the MAC address-table move update information on
the switch.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing