EasyManuals Logo

Cisco Catalyst 3750-X Command Reference

Cisco Catalyst 3750-X
1244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #818 background imageLoading...
Page #818 background image
2-786
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show power inline
This is an example of output from the show power inline interface-id command on a switch port.
Table 2-46 describes the output fields.
Switch> show power inline gigabitethernet0/5
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi0/5 auto off 0.0 n/a n/a 15.4
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi0/5 15.4 15.4
This is an example of output from the show power inline module switch-number command on stack
member 3. Table 2-46 describes the output fields.
Switch> show power inline module 3
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
3 865.0 864.0 1.0
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi3/0/1 auto power-deny 4.0 n/a n/a 15.4
Gi3/0/2 auto off 0.0 n/a n/a 15.4
Gi3/0/3 auto off 0.0 n/a n/a 15.4
Gi3/0/4 auto off 0.0 n/a n/a 15.4
Gi3/0/5 auto off 0.0 n/a n/a 15.4
Gi3/0/6 auto off 0.0 n/a n/a 15.4
Gi3/0/7 auto off 0.0 n/a n/a 15.4
Gi3/0/8 auto off 0.0 n/a n/a 15.4
Gi3/0/9 auto off 0.0 n/a n/a 15.4
Gi3/0/10 auto off 0.0 n/a n/a 15.4
<output truncated>
Table 2-46 show power inline Field Descriptions
Field Description
Available The total amount of configured power
1
on the PoE switch in watts (W).
Used The amount of configured power that is allocated to PoE ports in watts.
Remaining The amount of configured power in watts that is not allocated to ports in the
system. (Available – Used = Remaining)
Admin Administration mode: auto, off, static.
Oper Operating mode:
on—The powered device is detected, and power is applied.
off—No PoE is applied.
faulty—Device detection or a powered device is in a faulty state.
power-deny—A powered device is detected, but no PoE is available, or the
maximum wattage exceeds the detected powered-device maximum.

Table of Contents

Other manuals for Cisco Catalyst 3750-X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3750-X and is the answer not in the manual?

Cisco Catalyst 3750-X Specifications

General IconGeneral
Switching Capacity160 Gbps
Stacking Bandwidth64 Gbps
Max Stacking Units9
Layer SupportLayer 2 and Layer 3
Form FactorRack-mountable
DRAM256 MB
Flash Memory64 MB
ModelCisco Catalyst 3750-X Series
Ports24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces4 SFP or 2 SFP+
FeaturesStackWise Plus, EnergyWise
ImageIP Base or IP Services
Operating Temperature0 to 40°C
Operating Humidity10 to 85% noncondensing

Related product manuals