Cisco Catalyst 3750-X Command Reference

2-280
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
ip dhcp snooping vlan information option format-type circuit-id string
Examples This example shows how to configure the option-82 circuit-ID suboption:
Switch(config-if)# ip dhcp snooping vlan 250 information option format-type circuit-id
string customerABC-250-0-0
This example shows how to configure the option-82 circuit-ID override suboption:
Switch(config-if)# ip dhcp snooping vlan 250 information option format-type circuit-id
override string testcustomer
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Note The show ip dhcp snooping user EXEC command only displays the global command output, including
a remote-ID configuration. It does not display any per-interface, per-VLAN string that you have
configured for the circuit ID.
Related Commands Command Description
ip dhcp snooping information
option format remote-id
Configures the option-82 remote-ID suboption.
show ip dhcp snooping Displays the DHCP snooping configuration.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing