Cisco Catalyst 3750-X Command Reference

2-355
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
location (global configuration)
Examples This example shows how to configure civic location information on the switch:
Switch(config)# location civic-location identifier 1
Switch(config-civic)# number 3550
Switch(config-civic)# primary-road-name “Cisco Way”
Switch(config-civic)# city “San Jose”
Switch(config-civic)# state CA
Switch(config-civic)# building 19
Switch(config-civic)# room C6
Switch(config-civic)# county “Santa Clara”
Switch(config-civic)# country US
Switch(config-civic)# end
You can verify your settings by entering the show location civic-location
privileged EXEC
command.
This example shows how to configure the emergency location information location on the switch:
Switch (config)# location elin-location 14085553881 identifier 1
You can verify your settings by entering the show location elin privileged EXEC command.
Related Commands Command Description
location (interface configuration) Configures the location information for an interface.
show location Displays the location information for an endpoint.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing