Cisco Catalyst 3750-X Command Reference

2-401
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
mls qos dscp-mutation
This example show how to remove the DSCP-to-DSCP-mutation map name dscpmutation1 from the port
and to reset the map to the default:
Switch(config-if)# no mls qos dscp-mutation dscpmutation1
You can verify your settings by entering the show mls qos maps privileged EXEC command.
Related Commands Command Description
mls qos map dscp-mutation Defines the DSCP-to-DSCP-mutation map.
mls qos trust Configures the port trust state.
show mls qos maps Displays QoS mapping information.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing