Cisco Catalyst 3750-X

2-536
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
rep segment
You can verify your settings by entering the show interfaces rep privileged EXEC command. To verify
which port in the segment is the primary edge port, enter the show rep topology privileged EXEC
command.
Related Commands Command Description
show interfaces rep
[detail]
Displays REP configuration and status for all interfaces or the specified
interface.
show rep topology
[detail]
Displays information about all ports in the segment, including which one was
configured and selected as the primary edge port.