2-599
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show controllers ethernet-controller fastethernet
This is an example of output from the show controllers ethernet-controller fastethernet 0 stack
command on a stack member:
Switch# show controller ethernet-controller fastethernet 0 stack
Switch Interface-Name Duplex Speed Link-State Active-Link
-------------------------------------------------------------------
3 Fa0 a-full a-100 up
3 Fa0-Physical a-full a-100 up *
Related Commands Command Description
debug fastethernet Enables debugging of the Ethernet management port.