Cisco Catalyst 3750-X Command Reference

2-611
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show diagnostic
Defaults This command has no default setting.
Command Modes User EXEC
Command History
Usage Guidelines The show diagnostic post command output is the same as the show post command output.
In Catalyst 3750-X switch stacks, if you do not enter the switch number parameter with the content,
result, schedule, and switch keywords, information for all stack members is displayed.
On Catalyst 3750-X switches, the show diagnostic result switch [number | all] [detail] command output
is the same as the show diagnostic switch [number | all] [detail] command output.
On Catalyst 3560-X switches, the show diagnostic result [detail] command output is the same as the
show diagnostic switch [detail] command output.
Examples This example shows how to display the online diagnostics that are configured on all the PoE-capable
switches in a stack:
Switch> show diagnostic content switch all
Switch 1:
Diagnostics test suite attributes:
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) TestPortAsicStackPortLoopback ---> B*N****I** not configured n/a
2) TestPortAsicLoopback ------------> B*D*X**IR* not configured n/a
3) TestPortAsicCam -----------------> B*D*X**IR* not configured n/a
4) TestPortAsicRingLoopback --------> B*D*X**IR* not configured n/a
5) TestMicRingLoopback -------------> B*D*X**IR* not configured n/a
6) TestPortAsicMem -----------------> B*D*X**IR* not configured n/a
7) TestInlinePwrCtlr ---------------> B*D*X**IR* not configured n/a
<output truncated>
schedule Display the scheduled diagnostic tests.
status Display the running diagnostic tests.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing