2-630
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show env xps
1-A - - - -
1-B - - - - SP 715
2-A - - - -
2-B - - - -
9-A 1A C3KX-PWR-1100WAC LIT141307RK OK RPS 1100
9-B 1B Not Present
This is an example of output from the show env xps system command:
Switch# show env xps system
============================================================================
XPS 0101.0100.0000 :
============================================================================
XPS Cfg Cfg RPS Switch Current Data
Port XPS Port Name Mode Role Pri Conn Role-State Switch #
---- -------------------- ---- ------- --- ------ ---------- --------
1 - On Auto-SP 1 Yes SP-PS -
2 - On Auto-SP 2 Yes SP-PS -
3 - On Auto-SP 3 No - -
4 none On Auto-SP 5 No - -
5 - Off Auto-SP 6 No - -
6 - On Auto-SP 7 No - -
7 - On Auto-SP 8 No - -
8 - On Auto-SP 9 No - -
9 test On Auto-SP 4 Yes RPS-NB 1
This is an example of output from the show env xps thermal command:
Switch# show env xps thermal
=============================================
XPS 0101.0100.0000 :
=============================================
Fan Status
---- -----------
1 OK
2 OK
3 NOT PRESENT
PS-1 NOT PRESENT
PS-2 OK
Temperature is OK
This is an example of output from the show env xps upgrade command when no upgrade is occurring:
Switch# show env xps upgrade
No XPS is connected and upgrading.
These are examples of output from the show env xps upgrade command when an upgrade is in process:
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Waiting 0%
Switch#
*Mar 22 03:12:46.723: %PLATFORM_XPS-6-UPGRADE_START: XPS 0022.bdd7.9b14 upgrade has
started through the Service Port.
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Receiving 1%
Switch# show env xps upgrade