Cisco Catalyst 3750-X Command Reference

2-690
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show ipc
Examples This example shows how to display the IPC routing status:
Switch> show ipc mcast status
IPC Mcast Status
Tx Rx
Total Frames 0 0
Total control Frames 0 0
Total Frames dropped 0 0
Total control Frames dropped 0 0
Total Reliable messages 0 0
Total Reliable messages acknowledged 0 0
Total Out of Band Messages 0 0
Total Out of Band messages acknowledged 0 0
Total No Mcast groups 0 0
Total Retries 0 Total Timeouts 0
Total OOB Retries 0 Total OOB Timeouts 0
Total flushes 0 Total No ports 0
This example shows how to display the participating nodes:
Switch> show ipc nodes
There is 1 node in this IPC realm.
ID Type Name Last Last
Sent Heard
10000 Local IPC Master 0 0
This example shows how to display the local IPC ports:
Switch> show ipc ports
There are 8 ports defined.
Port ID Type Name (current/peak/total)
There are 8 ports defined.
10000.1 unicast IPC Master:Zone
10000.2 unicast IPC Master:Echo
10000.3 unicast IPC Master:Control
10000.4 unicast IPC Master:Init
10000.5 unicast FIB Master:DFS.process_level.msgs
10000.6 unicast FIB Master:DFS.interrupt.msgs
10000.7 unicast MDFS RP:Statistics
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
0/2/159
10000.8 unicast Slot 1 :MDFS.control.RIL
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
0/0/0
RPC packets:current/peak/total
0/1/4

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing