Cisco Catalyst 3750-X Command Reference

2-694
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show ipv6 access-list
Related Commands
bgp (matches) Border Gateway Protocol. The protocol type that the packet is equal to and
the number of matches.
sequence 10 Sequence in which an incoming packet is compared to lines in an access
list. Access list lines are ordered from first priority (lowest number, for
example, 10) to last priority (highest number, for example, 80).
Table 2-37 show ipv6 access-list Field Descriptions (continued)
Field Description
Command Description
clear ipv6 access-list Resets the IPv6 access list match counters.
ipv6 access-list Defines an IPv6 access list and puts the switch into IPv6 access-list
configuration mode.
sdm prefer Configures an SDM template to optimize system resources based on how the
switch is being used.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing