Cisco Catalyst 3750-X Command Reference

2-790
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show power inline
This is an example of output from the show power inline police interface-id command on a standalone
switch.
Switch> show power inline priority
Interface Admin Oper Priority
State State
---------- ------ ---------- --------
Gi3/0/1 auto off low
Gi3/0/2 auto off low
Gi3/0/3 auto off low
Gi3/0/4 auto off low
Gi3/0/5 auto off low
Gi3/0/6 auto off low
Gi3/0/7 auto off low
Gi3/0/8 auto off low
Gi3/0/9 auto off low
Gi3/0/10 auto off low
Gi3/0/11 auto off low
Gi3/0/12 auto off low
Gi3/0/13 auto off low
Gi3/0/14 auto off low
Gi3/0/15 auto off low
Gi3/0/16 auto off low
Gi3/0/17 auto off low
Gi3/0/18 auto off low
Gi3/0/19 auto off low
Gi3/0/20 auto off low
Gi3/0/21 auto off low
Related Commands Command Description
logging event
power-inline-status
Enables the logging of PoE events.
power inline Configures the power management mode for the specified PoE port or for all
PoE ports.
show controllers
power inline
Displays the values in the registers of the specified PoE controller.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing