Cleverscope CS300 - Count Tab

Cleverscope CS300 Reference Manual v2.11
Page 144 www.cleverscope.com ©Cleverscope 2004-2015
21.4 Count Tab
Count Protocol Options Tab
Name
Displays the Name as set in the Protocol List.
Number of inputs
used
Click on the up or down arrow or in the field to select the inputs required.
Bit D0 – D7 – Input
Analog Threshold
Click in the Input field to assign the input to a data bit.
Click in the field to set the threshold value.
Copy to Notes
Click the button to toggle the switch to copy the results to notes.