Cleverscope CS300 Reference Manual v2.11
Page 176 www.cleverscope.com ©Cleverscope 2004-2015
27 Cleverscope Support
The Cleverscope software has been developed by Cleverscope Ltd. as a tool for displaying and manipulating
captured analog electrical signals on a PC.
It can be set to work with a variety of other signal acquirers including the Strobes 901/901A Acquisition Units or
an internal soundcard.
If you are having problems please check the Forums on the Cleverscope website www.cleverscope.com. If you
still can’t resolve your problem please contact us at:
Cleverscope Ltd.
PO Box 26527
Epsom
Auckland 1344
New Zealand
27.1 Minimum PC Requirements
The minimum PC requirements to use the Cleverscope CS328A are a Pentium class computer with at least 256
Mbyte of memory, running Windows 2000 or later.
27.2 Evaluation Software
An evaluation version of the Cleverscope application software is available from the Cleverscope website at
www.cleverscope.com.
Visit the www.cleverscope site, and then go to the Evaluate and Subscribe section shown below.
To Next Page
Loading...