Cleverscope CS300 Reference Manual v2.11
Page 168 www.cleverscope.com ©Cleverscope 2004-2015
25.6 Using the Cleverscope Application with a Classic CS320/8
If you are updating the Cleverscope application, and you plan to use the application with a
Classic CS320/8
,
and you have not used the
Classic CS320/8
before, you will need to install the Classic Cleverscope CS328
Driver by checking the option.
Classic Cleverscopes
have a serial number of less than 4000.
25.7 Updating Cleverscope Applications Prior to 6430
If your Cleverscope application had a version number prior to 6430, it may have been using the legacy
QuickUSB
driver (CS328A varieties only). This driver is no longer used. If the driver is not required by another
application, an additional option will be displayed Remove Legacy QuickUSB Driver. If this option is selected,
the
QuickUSB
driver will be removed. Make sure you restart the computer after the update is complete.
To Next Page
Loading...