v2.13 Cleverscope CS300 Reference Manual
©Cleverscope 2004-2018 www.cleverscope.com Page 167
Note Ensure Install Classic CS328 Driver is
checked if you have the
Classic CS328
(with
a serial number less than 4000).
Ensure Update Cleverscope Application
Software is checked and click Install. The
installer will update the current copy of
Cleverscope and any drivers selected. If
required, please click Continue Anyway while
installing the USB drivers. Once finished, click
Finished to exit the installer.
This completes the application update process. This process does not update the firmware. See section 25.8 for
updating firmware.
To use the
Cleverscope Acquisition Unit
, plug it in, and turn on the power. If the drivers were updated, the
driver will be automatically loaded in Windows Vista or Windows 7. In Windows XP choose to update without
connecting to the web, and take defaults from there on.
To Next Page
Loading...