Cleverscope CS300 - Acquire the Signal Generator Output

v2.13 Cleverscope CS300 Reference Manual
©Cleverscope 2004-2018 www.cleverscope.com Page 95
16.3 Acquire the Signal Generator Output
Control Panel – Set Acquire
Set Probe
Set Trigger 1 Source
Set Trigger 1 Level
Click inside channel A Probe attenuation field to select
x1 option.
Click arrows or inside Source field to select source –
Chan A.
Click to set the Trigger 1 Level to 0.
Initiate Acquire
Click and you should see a graph similar to
that shown