User's Manual
159
Figure 6-131 Icons
Table 6-25 Operations
●
Select one by one: Point to the panel, and then click at the
upper right side to select the panel. means the panel is
selected.
●
Select in batches: Select
to select all the panels on the page.
Point to the panel, and then click or double-click the panel to play
back the video record (10 s before and after the snapshot).
Point to the panel, and then click to add picture to database. See
"6.8.3.2.3 Adding from Detection Results".
●
Export one by one: Click to export picture, video and video
player. For details, see "6.2.4.3 Exporting Face Records".
●
Export in batches: Select the panel and click to export picture,
video or excel. For details, see "6.2.4.3 Exporting Face Records".
After setting alarm linkage snapshot, during exporting images, the
system exports detected images and panoramic images at the time of
snapshot.
6.8.6.2 Searching by Database
Search vehicle recognition information according to database.
Step 1 On the
LIVE page, click , and then select AISEARCH > Search by Vehicle.
Step 2 Select device from the device tree, and then click Plate Database tab.
To Next Page
Loading...
Need help?
General
