User's Manual
55
Figure 5-20 Confirm
Step 6 Click Continue to add or Finish.
●
Click
Continue to add, device goes back to Smart add page to add more remote
device.
●
Click
Finish to complete adding remote device process. Device displays Device page to
view the newly added remote device information.
5.4.2.3 RTSP
Step 1 Click , and then select DEVICE.
Step 2 On the Device List page, click Add.
The Add Device page is displayed.
Step 3 Click
RTSP.
Step 4 Enter RTSP address as required.
RTSP address format is rtsp://<username>:<password>@<IP
address >:<port>/cam/realmonitor?channel=1&subtype=0.
●
Username: Username of the remote device.
●
Password: Password of the remote device.
●
IP address: IP address of the remote device.
●
Port: 554 by default.
●
Channel: The channel number of the stream media device to be added.
●
Subtype: Stream type. 0 for main stream, and 1 for sub stream.
Step 5 Select a channel No.
Step 6 Click Add.