User's Manual
75
6.3 Face Recognition
The system compares captured face with the face database and works out the similarity. When the
similarity reaches the threshold as you have defined, an alarm will be triggered.
6.3.1 Configuration Modes
Face recognition can be configured in the following modes:
●
Face recognition by camera. For details, see "6.3.2 Face Recognition by Camera".
●
Face detection by camera+ face recognition by device. For details, see "6.3.3 Face Detection by
Camera + Face Recognition by Device".
●
Face recognition by camera + face recognition by device. For details, see "6.3.4 Face Recognition
by Camera + Face Recognition by Device".
●
Face detection by device + face recognition by device. For details, see "6.3.5 Face Detection by
Device + Face Recognition by Device".
●
Video metadata by camera or by device + face recognition by device. For details, see "6.3.6 Video
Metadata + Face Recognition by Device".
6.3.2 Face Recognition by Camera
6.3.2.1 Configuration Procedure
Figure 6-21 Configure face recognition (AI by camera)
6.3.2.2 Enabling AI Plan
To use AI by camera, you need to enable the corresponding AI plan first. For details, see "6.2.1
Enabling AI Plan".
6.3.2.3 Configuring Remote Face Database
The Device can get face databases from the remote devices, and also allows creating face databases
for remote devices. The remote device face database is suitable for face recognition AI by Camera.
You cannot view face image information on the remote devices from the Device.
6.3.2.3.1 Creating Face Database for Remote Devices
Procedure
Step 1 On the LIVE page, click , and then select FILE > Face Management > Face Database >
Remote.
Step 2 Select a remote device from the
Remote Device drop-down list.
Step 3 Click Create.
To Next Page
Loading...
Need help?
General
