Dahua Technology DHI-IVSS7008 - Local Device; One-Click Disarming

User's Manual
263
Audio and light alarm is available when AI by camera is used for IVS detection and the camera
supports this function.
Step 1 Click
Actions and select Camera Audio and Remote Warning Light.
Figure 8-47 Camera audio
Figure 8-48 Remote warning light
Step 2 Configure the parameters.
Table 8-18 Audio and light alarm parameters
Parameter
Description
Camera Audio
File Name
Select the audio file to be played when an alarm is
triggered.
Play Mode Set the play times of audio file.
Remote Warning
Light
Mode Select
Flicker
or
Always on
.
Flicker Frequency
When
Flicker
is selected as
Mode
, set the flicker
frequency.
Duration
Set how long the warning light flickers or keeps on
after an alarm is triggered.
8.4.2 Local Device
Set IVSS alarm event, including abnormal event, device offline alarm, AI application, and local device
alarm.
8.4.2.1 One-click Disarming
Disarm alarm linkage actions as needed to avoid interference caused by alarms.
Step 1 Click , or click on the configuration page, and then select EVENT.
Step 2 Select the root node in the device tree.
Step 3 Select Overview > Disarming.