User's Manual
60
●
AI plan is available on select models.
●
The Device automatically shows the AI functions available on the connected cameras.
Step 1 Click , or click on the configuration page, and then select EVENT.
The EVENT page is displayed.
Step 2 Select a camera in the device tree on the left.
Step 3 Select AI Application > AI Plan > AI Plan.
●
The page might vary depending on the function capabilities of cameras.
●
When the camera is a PTZ camera, configure presets on the camera system first, and
then you can set AI features for each preset of the PTZ camera.
Step 4 Click to enable AI detection plan. The icon becomes .
When there is a conflict between the to-be-enabled AI plan and an enabled plan, disable
the enabled plan first.
Step 5 Click
Save.
6.2.2 Configuring Face Detection
Configure alarm rule of face detection.
Step 1 Click or click on the configuration page, and then select EVENT.
Step 2 Select a remote device in the device tree on the left.
Step 3 Select AI Plan > Face Detection.
To Next Page
Loading...
