User's Manual
258
Email
The system sends alarm email
to all added receivers when
there is corresponding an
alarm event.
Email configuration has been
completed. See "8.3.2.3 Email"
for detailed information.
Snapshot
The system takes snapshots of
the linked channel when
there is an alarm event.
–
Preset
The system links the selected
remote device to rotate to the
designated preset point when
there is a corresponding
alarm event.
PTZ device has been added,
and preset point has been
added. See "5.4.2 Adding
Remote Device" for detailed
information.
Local Alarm Output
When there is an alarm,
system can trigger the
corresponding device to
generate alarm.
The Device is connected with
alarm output device. See
"3.4.1.4 Alarm Output".
Remote Device Alarm Output
The remote device has been
added, and the remote device
is connected with alarm
output device. See "5.4.2
Adding Remote Device" for
detailed information.
Access
When there is an alarm,
system can trigger the
corresponding access control
device to open door and close
door.
See "5.4.2 Adding Remote
Device" for detailed
information.
Voice Prompt
When there is an alarm,
system can play the selected
audio file.
Audio function has been
configured. See "7.3.5 Voice
Management" for detailed
information.
Smart Tracking
Alarm is triggered when a
tripwire or intrusion behavior
is detected. If smart tracking
action is configured, the PTZ
camera automatically rotates
to the target view to track it.
See "7.1.1.3.6 Smart Tracking".
Report Alarm
When an alarm occurs, the
system reports the alarm to
alarm center.
Alarm center has been
enabled. For details, see
"8.3.2.8 Alarm Center".
Audio and Light Alarm
When an alarm occurs, the
system associates with the
remote device to perform
audio and light actions.
The camera that supports this
function has been connected.
For details, see "8.4.1.13 Audio
and Light Alarm".
8.4.1.1 Record
Enable record control function. The system links the selected remote device to record when there is
corresponding alarm event.