User's Manual
195
The maximum number of linear scannings depends on the camera capability. If not limited
on the camera, you can config up to 5 scannings by default.
Figure 7-27 Set a linear scanning
Step 5 To call the linear scanning, hover over the name, and then click . To stop, click .
7.1.3.2.5 Enabling Auxiliary Functions
Enable PTZ windshield wiper, light and IR.
Step 1 Log in to PCAPP.
Step 2 Select a PTZ camera from the views.
Step 3 On the PTZ panel, click .
Figure 7-28 Auxiliary functions
Step 4 Drag the slider to ON or OFF to enable or disable the function.
●
: Windshield wiper. It is available on select models.
●
: Light. It is available on select models.
●
: IR. It is available on select models.
7.2 Recorded Files
Search or play back the record file or image on the device. At the same time, you can export record
file or image to designated storage path.