User's Manual
97
Figure 6-47 Face register
Step 2 Select a face database, and fill in person information according to your actual situation.
Step 3 Click OK to save the configuration.
6.3.3.4.4 Creating Passerby Database
If you configure an alarm to link passerby database, when the detected face is not in the face
database, system automatically captures the face image, and then save it to the passerby database.
Step 1 On the
LIVE page, click , and then select FILE > Face Management > Face Database >
PasserBy Database.
Step 2 Click Create Passerby Database.
To Next Page
Loading...
