User's Manual
305
Service.
Figure 8-96 System service
Step 2 Enable or disable system service according to your actual situation.
Table 8-31 System service
SSH
After enabling this function, you can access the Device through SSH protocol
to carry out system debugging and IP configuration. This function is disabled
by default.
You are recommended to disable this function. Otherwise there might be
security risks.
Mobile Phone
Push
After enabling this function, you can access the Device with mobile phone
client to receive information from the Device.
You are recommended to disable this function. Otherwise there might be
security risks.
CGI Enable
After this function is enabled, third-party platform can connect the Device
through CGI protocol.
You are recommended to disable this function. Otherwise there might be
security risks.
ONVIF Enable
After this function is enabled, other devices can connect the Device through
ONVIF protocol.
You are recommended to disable this function. Otherwise there might be
security risks.
Run Log
After enabling it, you can view system running logs in
>
.
To Next Page
Loading...
Need help?
General
