Dasan V8102 - Page 11

User Manual UMN:CLI
V8102
11
12.1.1.8 BGP Aggregation
‘bgp aggregate-nexthop-check' command
added.
12.1.1.9 BGP Path Selection
RFC1771 configuration related CLI added.
12.1.3 BGP Autonomous System
Number Formatting
CLI to change the default display and regular
expression match format of BGP added.
‘bgp asnotation {dot | dotplus}' command add-
ed.
12.1.4 Enforcing the First AS Path
Feature
‘bgp enforce-first-as’ command added.
12.1.5 External BGP Peering Session
Reset
‘bgp fast-external-failover’ command added.
12.1.6 BGP Scan Time
‘bgp scan-time <0-60>' command added.
12.1.7 BGP Update Delay
‘bgp update-delay <1-3600>' command added.
12.1.9 Route Reflector
Displaying BGP network information related
CLI added.
12.1.15 BGP Session Reset
Managing BGP network related CLI added and
updated.
12.1.16 BGP AS-path Access List
Definong AS path access-list related CLI add-
ed.
12.1.20 BGP Network
Backdoor route and route-map related CLI
added.
12.1.22 BGP Filtering through Prefix
Lists
BGP Filtering through Prefix Lists Chapter
added.
12.1.24 BGP Monitoring and Man-
agement
BGP configuration related CLI added.
12.2.17 Blocking Routing Information
‘distribute-list WORD in' command added.
12.2.19.1 Displaying OSPF Protocol
Information
‘show ip protocols ospf ' command added.
12.3.6.2 Not So Stubby Area (NSSA)
NSSA cnfiguration related CLI added.
12.3.8 Graceful Restart Support
Restarting OSPFv3 protocol pcocessor related
CLI added.
12.3.14 OSPFv3 Distance
OSPFv3 Distance configuration related CLI
added.
12.3.15.1 Displaying OSPFv3 Infor-
mation
‘show ipv6 protocols ospf ' related CLI added.
12.4.16 RIP Routing Metric Update
Enabling/disabling the RIP routing metric up-