UMN:CLI User Manual
V8102
10
9.7.1.3 DHCPv6 unique identifier
(DUID)
9.9.2.2 Access to Associated IP Ad-
dress
‘vip-access' CLI updated.
RRP debugging related CLI added.
9.11.4 Invalid Traffic Guard
Invalid Traffic Guard function description add-
ed.
9.15 Configuring PPPoE Tag Option
Format
Configuring PPPoE Tag Option Chapter add-
ed.
10.1.2.1 IGMP Static Join
10.2.2.4 IGMP Snooping R-APS
Enabling R-APS packet related CLI added.
10.2.3.8 TCN Multicast Flooding
Topology Change Notification(TCN) debugging
related CLI added.
10.2.7.8 Displaying IGMP Proxy In-
formation
Displaying IGMP proxy group membership
information related CLI added.
10.3.1.1 Enabling Multicast Routing
Enabling Layer 3 multicast routing for IPv6
related CLI added.
10.3.1.5 Static Multicast Route Con-
figuration
configuring mroute related CLI added.
10.3.1.7 Displaying RPF information
‘show ip rpf A.B.C.D' command added.
‘clear ip pim sparse-mode packet' command
added.
10.3.3.1 Rendezvous Point
Usinf anycast RP related CLI added.
10.3.3.6 Debugging PIM-SM
Debuggin PIM-SM related CLI added.
10.4 IP Multicast Interface
Displaying IP multicast interface configuration
related CLI added.
IPv6 Multicast Chapter added.
11.1 Multicast Listener Discovery
(MLD)
Multicast Listener Discovery (MLD) related CLI
added.
11.2 IPv6 Multicast Functions
MLD snooping related CLI added.
11.3 IPv6 Multicast Routing
Multicast Routing related CLI added.
11.4 IPv6 Multicast Interface
Displaying IPv6 multicast interface configura-
tion related CLI added.
11.1.8 Displaying MLD Information
‘show ipv6 mld-proxy' command added.
12.1.1.4 Enabling ASN Capabilities
‘bgp extended-asn-cap' command added.
12.1.1.6 IPv4 Unicast Address
‘bgp default ipv4-unicast' command added.