Dasan V8102 - Page 9

User Manual UMN:CLI
V8102
9
ed.
7.4.3 Syslog index
‘syslog index snmp' command added.
7.4.7 Displaying Syslog Message
Received syslog message related CLI updat-
ed.
7.4.8 Uploading Syslog File
Uploading syslog files using FTP/TTP related
CLI added.
7.7.2.2 Creating MEP
Assigning the configured MEP related CLI
added.
-
‘show redundancy sync-module-list' command
added.
7.13 MAC Table
‘show mac aging-time' command added.
7.16.2 SYN Configuration
‘ipv6 tcp syn-guard BANDWIDTH' command
added.
7.18.7 Access List Entries Limit
Access list limitation related CLI added.
8.1.1.1 Registering ARP Table
Deleting the ARP entries related CLI added.
8.2.10.6 ND RA Guard
IPv6 RA Guard feature added.
8.2.13 Debugging Neighbor Discov-
ery
IPv6 ND packet debugging related CLI added.
9.1.1.2 Adding a Member Port to
VLAN Group
‘switchport trunk allowed vlan' related CLI
added.
9.1.7 Displaying VLAN Information
Displaying VLAN information related CLI up-
dated.
9.3.2.4 Class Creation
Displaying created class related CLI added.
9.3.6.1 Creating Admin Flow for
packet classification
Displaying created admin flow related CLI
added.
9.3.9 Displaying Policy Interface
Configuration
Displaying policy interface configuration relat-
ed CLI added.
9.4.4 Enabling STP Function
Enabling/disabling STP function on a interface
CLI added.
9.4.11 Loop Back Detection
Error-disable recovery function related CLI
added.
9.6.6.5 Appending Enterprise Num-
ber
‘policy append enterprise-number' command
added.
9.6.11 Debugging DHCP
‘show debugging dhcp' command added.
9.7 Dynamic Host Configuration Pro-
tocol (DHCP) for IPv6
DHCP for IPv6 Chapter added.