EasyManua.ls Logo

Dasan V8102 - Page 333

Dasan V8102
910 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual UMN:CLI
V8102
333
Command
Mode
Description
A.B.C.D/M: source/destination IP address with mask
any: any source/destination IP address
ip {A.B.C.D | A.B.C.D/M | any}
{A.B.C.D | A.B.C.D/M | any} icmp
{<0-255> | any} {<0-255> | any}
Classifies an IP protocol (ICMP).
A.B.C.D: source/destination IP address
A.B.C.D/M: source/destination IP address with mask
any: any source/destination IP address
0-255: ICMP message type number
0-255: ICMP message code number
ip {A.B.C.D | A.B.C.D/M | any}
{A.B.C.D | A.B.C.D/M | any} {tcp |
udp}
Classifies an IP protocol (TCP/UDP).
A.B.C.D: source/destination IP address
A.B.C.D/M: source/destination IP address with mask
any: any source/destination IP address
ip {A.B.C.D | A.B.C.D/M | any}
{A.B.C.D | A.B.C.D/M | any} {tcp |
udp} {<1-65535> | any} {<1-
65535> | any}
Classifies an IP protocol (TCP/UDP).
A.B.C.D: source/destination IP address
A.B.C.D/M: source/destination IP address with mask
any: any source/destination IP address
0-65535: TCP/UDP source/destination port range
any: any TCP/UDP source/destination port
ip {A.B.C.D | A.B.C.D/M | any}
{A.B.C.D | A.B.C.D/M | any} tcp
{<1-65535> | any} {<1-65535> |
any} {TCP-FLAG | any}
Classifies an IP protocol (TCP).
A.B.C.D: source/destination IP address
A.B.C.D/M: source/destination IP address with mask
any: any source/destination IP address
0-65535: TCP source/destination port range
any: any TCP source/destination port
TCP-FLAG: TCP flag (e.g. S(SYN), F(FIN))
any: any TCP flag
mac {SRC-MAC-ADDR | SRC-
MAC-ADDR/M | any} {DST-MAC-
ADDR | DST-MAC-ADDR/M | any}
Classifies MAC address.
SRC-MAC-ADDR: source MAC address
DST-MAC-ADDR: destination MAC address
SRC/DST-MAC-ADDR/M: source/destination MAC
address with mask bit
any: any source/destination MAC address (ignore)
When specifying a source and destination IP address as a packet-classifying pattern, the
destination IP address must be after the source IP address.
To specify a packet-classifying pattern with IPv6 address, use the following command.
Command
Mode
Description
ipv6 { X:X::X:X | X:X::X:X/M | any}
{X:X::X:X |X:X::X:X/M | any} [<0-
255>]
Flow
Classifies an IPv6 address.
X:X::X:X : source/destination IPv6 address
X:X::X:X/M: source/destination IPv6 address with
mask
any: any source/destination IPv6 address
0-255: IP protocol number
ipv6 { X:X::X:X | X:X::X:X/M | any}
Classifies an IP protocol (ICMP).
!

Table of Contents