Dasan V8102 - Page 334

UMN:CLI User Manual
V8102
334
Command
Mode
Description
{X:X::X:X |X:X::X:X/M | any} icmp
X:X::X:X : source/destination IPv6 address
X:X::X:X/M: source/destination IPv6 address with
mask
any: any source/destination IPv6 address
ipv6 { X:X::X:X | X:X::X:X/M | any}
{X:X::X:X |X:X::X:X/M | any} icmp
{<0-255> | any} {<0-255> | any}
ipv6 { X:X::X:X | X:X::X:X/M | any}
{X:X::X:X |X:X::X:X/M | any} {tcp |
udp}
Classifies an IP protocol (TCP/UDP).
X:X::X:X : source/destination IPv6 address
X:X::X:X/M: source/destination IPv6 address with
mask
any: any source/destination IPv6 address
ipv6 { X:X::X:X | X:X::X:X/M | any}
{X:X::X:X |X:X::X:X/M | any} tcp
{<1-65535> | any} {<1-65535> |
any} [TCP_FLAG | any]
Classifies an IP protocol (TCP/UDP).
X:X::X:X : source/destination IPv6 address
X:X::X:X/M: source/destination IPv6 address with
mask
any: any source/destination IPv6 address
0-65535: TCP/UDP port range
any: any TCP/UDP port
TCP_FLAG: TCP flag vlaue
ipv6 { X:X::X:X | X:X::X:X/M | any}
{X:X::X:X |X:X::X:X/M | any} udp
{<1-65535> | any} {<1-65535> |
any}
To specify a packet-classifying pattern with various parameters (DSCP, CoS, ToS, IP
precedence, packet length, Ethernet type, IP header), use the following command.
Command
Mode
Description
dscp {<0-63> | any}
Flow
Classifies a DSCP value.
0-63: DSCP value
any: any DSCP (ignore)
cos {<0-7> | any}
Classifies an 802.1p priority.
0-7: 802.1p priority value
any: any 802.1p priority value (ignore)
tos {<0-255> | any}
Classifies all ToS field.
0-255: ToS value
any: any ToS value (ignore)
ip-precedence {<0-7> | any}
Classifies IP precedence.
0-7: IP precedence value
any: any IP precedence value (ignore)
length {<21-65535> | any}
Classifies a packet length.
(This can be used only in the extension mode!)
21-65535: IP packet length
any: any IP packet length (ignore)
ethtype {TYPE-NUM | arp | any}
Classifies the Ethernet type.
TYPE-NUM: Ethernet type field (hex, e.g. 0800 for
IPv4)
arp: address resolution protocol
any: any Ethertype (ignore)
inner-vid {<1-4094 | any}
Classifies a VLAN ID of the inner/outer tag.
1-4094: VLAN ID
outer-vid {<1-4094 | any}
inner-cos {<0-7> | any}
Classifies a CoS value of the inner/outer tag.