Dasan V8102 - Page 793

User Manual UMN:CLI
V8102
793
Command
Mode
Description
show onu deactive-reason gpon
OLT-ID
Enable/Global
Shows the reason of inactive ONUs.
show onu deactive-reason
Interface
[GPON]
To display the model names of the ONUs connected to a specified OLT, use the following
command.
Command
Mode
Description
show onu model-name gpon
OLT-ID
Enable/Global
Shows the model names of the ONUs.
ONU-ID: ONU ID (1 to 128) or ONU serial num-
ber
show onu model-name [ONU-
ID]
Interface
[GPON]
To display the number of MAC addresses currently learned in an ONU, use the following
command.
Command
Mode
Description
show onu mac-address gpon OLT-
ID
Enable/Global
Shows the number of MAC addresses
currently learned in ONUs connected to a
current OLT.
show onu mac-address [ONU-ID]
Interface
[GPON]
To display a host name of the specified ONU, use the following command.
Command
Mode
Description
show onu hostname gpon OLT-
ID
Enable/Global
Shows a host name of the specified ONU.
show onu hostname [ONU-IDs]
Interface
[GPON]
To display the IGMP group list of ONU (ONT), use the following command.
Command
Mode
Description
show onu igmp-group-list gpon
OLT-ID ONU-ID
Enable
Global
Shows the current IGMP group list of the ONU.
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu igmp-group-list ONU-
ID
Interface
[GPON]
To display the status of the ONU (ONT) UNI, use the following command.
Command
Mode
Description
show onu uni-status [gpon OLT-
ID]
Enable
Global
Shows the status of the ONU UNI.
ONU-ID: ONU ID (1 to 128) or ONU serial number