Dasan V8102 - Page 792

UMN:CLI User Manual
V8102
792
show onu firmware version
[ONU-IDs]
Interface
[GPON]
Shows the status of ONU firmware.
ONU-ID: ONU ID (1-128) or ONU serial number
• Changing Active Firmware
If an ONU supports the dual OS, you can change the active firmware using the following
command. To change the active firmware, use the following command.
Command
Mode
Description
onu firmware active-change
ONU-ID
Interface
[GPON]
Changes the active OS of ONU (with ONU reboot).
ONU-ID: ONU ID (1 to 128) or ONU serial number
13.2.22 Displaying ONU Information
To display the ONU (ONT) information, use the following command.
Command
Mode
Description
show onu info [gpon OLT-ID]
Enable
Global
Shows the information of ONU (ONT) per OLT
ID.
OLT-ID: GPON port number
show onu detail-info [gpon OLT-ID]
Shows the ONU (ONT) information in detail.
OLT-ID: GPON OLT port number
ONU-ID: ONU ID (1 to 128) or ONU serial
number
show onu detail-info [ONU-ID]
Interface
[GPON]
show onu info [ONU-ID]
Shows the ONU (ONT) information.
show onu feature-list [gpon OLT-ID]
Enable/Global
Shows the ONU feature list.
show onu feature-list [ONU-ID]
Interface
[GPON]
show onu alarm-status [gpon OLT-ID]
Enable/Global
Shows the alarm status of ONUs.
show onu alarm-status [ONU-ID]
Interface
[GPON]
To display the registered ONU (ONT) information, use the following command.
Command
Mode
Description
show onu active [gpon OLT-ID]
Enable
Global
Shows the registered ONU (ONT) information.
OLT-ID: GPON port number
show onu active count [gpon
OLT-ID]
Shows the number of active ONUs connected to a
specified GPON port.
show onu active [ONU-ID]
Interface
[GPON]
Shows the registered ONU (ONT) information.
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu active count
Show the number of active ONUs.
To display a reason of ONU deactivation, use the following command.