User Manual UMN:CLI
V8102
835
13.4.7.8 Displaying TDM Pseudowire Information
To display the information of TDM pseudowire profiles, use the following command.
show tdm-pw-profile [NAME]
Shows the information of TDM pseudowire profiles.
NAME: TDM pseudowire profile name
To display the list information of source MAC addresses for TDM pseudowire of ONU, use
the following command.
show onu tdm-pw source-
mac gpon OLT-ID ONU-ID
Shows the list of source MAC addresses for
TDM pseudowire of the specified ONU.
show onu tdm-pw source-
mac ONU-ID
13.4.8 Management Mode
The OLT manages the ONU through an ONU management and control interface (OMCI)
path. An OMCI is a configuration transmission path defined in the GPON standard. If the
OLT manages the ONU through a non-OMCI path, this ONU’s UNI port is connected as a
Virtual Eth and is controlled by its web/TR-69/SNMP management system.
To specify the management mode of ONU’s UNI port, use the following command.
mgmt-mode uni { eth | pots | ces
| video } UNI_PORT { omci | non-
omci link virtual-eth NUMBER}
Specifies the management mode of ONU’s UNI port
using OMCI or non-OMCI path.
UNI_PORT: UNI port number (1-32)
no mgmt-mode uni { eth | pots |
ces | video } UNI_PORT
Deletes the specified UNI port’s management mode.
To display the configured management mode of ONU, use the following command.
show onu uni-mgmt gpon OLT-
ID ONU-ID
Shows the management mode of ONU ID.
13.4.9 Video Return Path Mode
RF return path technology enables the pay-per-view and video-on-demand services that
are simply offered over traditional MSO (Multiservice Operator) infrastructure. In order to
configure video RF return path service, you need to create a Video return service ID.
To Next Page