Chapter 4 -Operational Procedures-
114
AS-410M Auto Slide Preparation System
⑪ Indication during operation
Information obtained from the barcode of the sample cassette
being processed, the number of slices and sectioning thickness
can be monitored during the slide preparation operation, based
on information acquired from the LK-400 PC.
⑫ Completion of the skipped operation
Samples which sample block barcode could not be read or have insufficient height or angle will be
skipped from the sectioning process. The skipped block numbers will be displayed on the screen
when slide preparation is completed.
Touch the MAIN button to return to the Main menu screen.
⑬ Completion of normal operation
The slide preparation operation completion screen will be
displayed after all sample block section making is completed, the
prepared slides are stored in the dry unit, and the sample blocks
are collected on the sample tray.
Touch the MAIN button to return to the Main screen.
Skipped block of the slide
(Sys. with BS-24)
Skipped block of the slide
preparation screen
Screen of slide preparation
operation completion
To Next Page
Loading...
Need help?
General