2-4 Infinity Vista VF6
2 MONITOR SETUP
When the battery charge is less than approximately 25%, the following happens:
z The battery gauge displays in yellow.
z The monitor emits an alert tone.
z The monitor displays the message Replace Battery Pack at frequent intervals.
If the battery charge drops below 10 V, monitoring stops, but monitoring settings,
trended data, and stored recordings are saved in memory.
Screen Brightness
To save power, the monitor’s display may automatically dim when you change to
battery operation.
With a lead acid battery, the display always dims on battery power. With a lithium ion
battery, you can choose whether or not the displays dims.
The Brightness setting remains in effect through a power cycle. Regardless of the
setting, lithium ion batteries can power the monitor for at least three hours, even if the
display remains bright during battery operation.
STEPS: Selecting the Screen Brightness
1. Press the Menu fixed key.
2. Click on
Monitor Setup.
3. Click on
Main Screen.
4. Click on
Screen Brightness.
5. Select
Dim or Bright and click the knob.
NOTE: The menu option Screen Brightness only appears when the monitor is
equipped with a lithium ion battery.
To Next Page
Loading...
