C
HAPTER
23
| Remote Monitoring Commands
– 579 –
EXAMPLE
Console(config)#interface ethenet 1/1
Console(config-if)#rmon collection history 21 buckets 24 interval 60 owner
mike
Console(config-if)#
rmon collection
stats
This command enables the collection of statistics on a physical interface.
Use the no form to disable statistics collection.
SYNTAX
rmon collection stats index [owner name]
no rmon collection stats index
index – Index to this entry. (Range: 1-65535)
name – Name of the person who created this entry. (Range: 1-127
characters)
DEFAULT SETTING
Enabled
COMMAND MODE
Interface Configuration (Ethernet)
COMMAND USAGE
â—† By default, each index number equates to a port on the swich, but can
be changed to any number not currently in use.
â—† If statistics collection is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
â—† The information collected for each entry includes:
input packets, bytes, dropped packets, and multicast packets
output packets, bytes, multicast packets, and broadcast packets.
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection stats 1 owner mike
Console(config-if)#
To Next Page
Loading...
Need help?
General