C
HAPTER
41
| IP Interface Commands
IPv6 Interface
– 941 –
clear ipv6 traffic This command resets IPv6 traffic counters.
COMMAND MODE
Privileged Exec
COMMAND USAGE
This command resets all of the counters displayed by the show ipv6 traffic
command.
EXAMPLE
Console#clear ipv6 traffic
Console#
echo reply messages The number of ICMP Echo Reply messages sent by the interface.
router solicit messages The number of ICMP Router Solicitation messages sent by the
interface.
neighbor advertisement
messages
The number of ICMP Router Advertisement messages sent by the
interface.
redirect messages The number of Redirect messages sent. For a host, this object will
always be zero, since hosts do not send redirects.
group membership
response messages
The number of ICMPv6 Group Membership Response messages
sent.
group membership
reduction messages
The number of ICMPv6 Group Membership Reduction messages
sent.
UDP Statistics
input The total number of UDP datagrams delivered to UDP users.
no port errors The total number of received UDP datagrams for which there was
no application at the destination port.
other errors The number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the
destination port.
output The total number of UDP datagrams sent from this entity.
Table 142: show ipv6 traffic - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General