C
HAPTER
25
| General Security Measures
Network Access (MAC Address Authentication)
– 646 –
COMMAND MODE
Interface Configuration
COMMAND USAGE
◆ The VLAN to be used as the guest VLAN must be defined and set as
active (See the vlan database command).
◆ When used with 802.1X authentication, the intrusion-action must be
set for “guest-vlan” to be effective (see the dot1x intrusion-action
command).
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
network-access
link-detection
Use this command to enable link detection for the selected port. Use the
no form of this command to restore the default.
SYNTAX
[no] network-access link-detection
DEFAULT SETTING
Disabled
COMMAND MODE
Interface Configuration
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
To Next Page
Loading...
Need help?
General