Edge-Core ES3510MA - ACL Information; Show Access-Group; Show Access-List; Table 85: ACL Information Commands

C HAPTER 26 | Access Control Lists
ACL Information
– 698 –
ACL INFORMATION
This section describes commands used to display ACL information.
show access-group This command shows the port assignments of ACLs.
COMMAND MODE
Privileged Executive
EXAMPLE
Console#show access-group
Interface ethernet 1/2
IP access-list david
MAC access-list jerry
Console#
show access-list This command shows all ACLs and associated rules.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show access-list
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.15.0
IP extended access-list bob:
permit 10.7.1.1 255.255.255.0 any
permit 192.168.1.0 255.255.255.0 any destination-port 80 80
permit 192.168.1.0 255.255.255.0 any protocol tcp control-code 2 2
MAC access-list jerry:
permit any host 00-30-29-94-34-de ethertype 800 800
IP extended access-list A6:
deny tcp any any control-flag 2 2
permit any any
Console#
Table 85: ACL Information Commands
Command Function Mode
show access-group Shows the ACLs assigned to each port PE
show access-list Show all ACLs and associated rules PE