C
HAPTER
27
| Interface Commands
– 710 –
===== RMON Stats =====
0 Drop Events
16900558 Octets
40243 Packets
170 Broadcast PKTS
23 Multi-cast PKTS
0 Undersize PKTS
0 Oversize PKTS
0 Fragments
0 Jabbers
0 CRC Align Errors
0 Collisions
21065 Packet Size <= 64 Octets
3805 Packet Size 65 to 127 Octets
2448 Packet Size 128 to 255 Octets
797 Packet Size 256 to 511 Octets
2941 Packet Size 512 to 1023 Octets
9187 Packet Size 1024 to 1518 Octets
Console#
show interfaces
status
This command displays the status for an interface.
SYNTAX
show interfaces status [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
vlan vlan-id (Range: 1-4093)
DEFAULT SETTING
Shows the status for all interfaces.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 120.
EXAMPLE
Console#show interfaces status ethernet 1/1
Information of Eth 1/1
Basic Information:
Port Type : 100TX
Mac Address : 00-E0-0C-00-00-FE
Configuration:
Name :
Port Admin : Up
To Next Page
Loading...
Need help?
General