C
HAPTER
41
| IP Interface Commands
IPv4 Interface
– 924 –
clear arp-cache This command deletes all dynamic entries from the Address Resolution
Protocol (ARP) cache.
COMMAND MODE
Privileged Exec
EXAMPLE
This example clears all dynamic entries in the ARP cache.
Console#clear arp-cache
This operation will delete all the dynamic entries in ARP Cache.
Are you sure to continue this operation (y/n)?y
Console#
show arp This command displays entries in the Address Resolution Protocol (ARP)
cache.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
This command displays information about the ARP cache. The first line
shows the cache timeout. It also shows each cache entry, including the IP
address, MAC address, type (static, dynamic, other), and VLAN interface.
Note that entry type “other” indicates local addresses for this router.
EXAMPLE
This example displays all entries in the ARP cache.
Console#show arp
ARP Cache Timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
10.1.0.0 FF-FF-FF-FF-FF-FF other VLAN1
10.1.0.254 00-00-AB-CD-00-00 other VLAN1
10.1.0.255 FF-FF-FF-FF-FF-FF other VLAN1
123.20.10.123 02-10-20-30-40-50 static VLAN2
145.30.20.23 09-50-40-30-20-10 dynamic VLAN3
Total entry : 5
Console#
To Next Page
Loading...
Need help?
General