C
HAPTER
22
| SNMP Commands
– 570 –
show snmp view This command shows information on the SNMP views.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
nlm This command enables or disables the specified notification log.
SYNTAX
[no] nlm filter-name
filter-name - Notification log name. (Range: 1-32 characters)
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
COMMAND USAGE
â—† Notification logging is enabled by default, but will not start recording
information until a logging profile specified by the snmp-server notify-
filter command is enabled by the nlm command.
Table 57: show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
To Next Page
Loading...
Need help?
General