Edge-Core ES3510MA - Settinga Time Range

C HAPTER 14 | Security Measures
Access Control Lists
– 298 –
◆ An ACL can have up to 32 rules. However, due to resource restrictions,
the average number of rules bound to the ports should not exceed 20.
SETTING A TIME
RANGE
Use the Security > ACL (Configure Time Range) page to sets a time range
during which ACL functions are applied.
CLI REFERENCES
◆ "Time Range" on page 545
PARAMETERS
These parameters are displayed:
Add
◆ Time-Range Name – Name of a time range. (Range: 1-30 characters)
Add Rule
◆ Time-Range – Name of a time range.
◆ Mode
■
Absolute – Specifies a specific time or time range.
■
Start/End – Specifies the hours, minutes, month, day, and year
at which to start or end.
■
Periodic – Specifies a periodic interval.
■
Start/To – Specifies the days of the week, hours, and minutes
at which to start or end.